High frequency furnace lining vibrator

This is a pure electric furnace lining furnace building machine. It can be customized according to the size of the crucible. The minimum size of the crucible can be made above 450mm. It is suitable for users who have no gas source or inconvenient gas source on site. The advantage of the machine is that it rotates automatically, no manual adjustment is required, and the tonnage range of the universal furnace is wider, saving time and effort.

Vibration time should be concentrated in the tapered section to achieve maximum density and optimum lining life.

Vibration of the tapered section begin 2 inches(51mm) from the bottom of the form/former.

Calculating Vibration Intervals

CASEN will provide the vibration time for your tapered section in your operations manual.

We use 6 minutes of vibration time in the tapered section.

After vibrating a section, the vibrator is lifted 4 inches, 100 mm to the next location.

This is about 4 links of the hoist chain.
In the 12 inches, 305 mm. Bing vibrated, divided by 4 inches, 100 mm.
This means we will vibrate in 3 locations of the tapered section.
Divide the number of locations by the number of minutes of vibration.

6 minutes divided by 3 locations means you vibrate for 2 minutes in each of 3 locations to the top of the tapered section.

Once the calculation is completed, begin the first vibration sequence.